PMI-I with old school mods from the 1980s and 90s.
Polished body with beautiful patina.
Speed Feed
12g Quick Changer
Cooper-T Bolt
Velocity Adjustment Mod (on the hammer, described below)
Delrin Pump Handle
PMI Wood Grips
Freshly Rebuilt (Component Valve)- seals and goes click-clack-bloop
I bought this about 11 years ago from Benji of Paintball DNA fame. At the time it was working, but on my first game out with it the 12g seal disintegrated and it sat for many years while I worked up the courage to buy a sheridan valve tool and rebuild it myself. It is now fresh and clean and working like it should.
The hammer has an interesting velocity adjustment mod. Instead of an RVA, the hammer itself is drilled and tapped for a grub screw that is accessible through the bolt-lug cutout. Inside the hammer, resting against the screw, is a ball bearing. As you turn in the grub screw it moves the ball bearing towards the rear of the marker, compressing the hammer spring and increasing the velocity. Pretty ingenious, I haven't heard of a mod like this before.
$220+ shipping OBO. I'll also throw in a Palmer's Sheridan valve tool for an extra $20.
Polished body with beautiful patina.
Speed Feed
12g Quick Changer
Cooper-T Bolt
Velocity Adjustment Mod (on the hammer, described below)
Delrin Pump Handle
PMI Wood Grips
Freshly Rebuilt (Component Valve)- seals and goes click-clack-bloop
I bought this about 11 years ago from Benji of Paintball DNA fame. At the time it was working, but on my first game out with it the 12g seal disintegrated and it sat for many years while I worked up the courage to buy a sheridan valve tool and rebuild it myself. It is now fresh and clean and working like it should.
The hammer has an interesting velocity adjustment mod. Instead of an RVA, the hammer itself is drilled and tapped for a grub screw that is accessible through the bolt-lug cutout. Inside the hammer, resting against the screw, is a ball bearing. As you turn in the grub screw it moves the ball bearing towards the rear of the marker, compressing the hammer spring and increasing the velocity. Pretty ingenious, I haven't heard of a mod like this before.
$220+ shipping OBO. I'll also throw in a Palmer's Sheridan valve tool for an extra $20.