Very early faded black to orange 03 Eclipse Eblade, doesn't have the updated iconic wired Evo beaver tail or e stamped eye cover on later versions.
Was told it came from a Bushwacker in who got it from the Eclipse tent. Original ano matched Excel barrel was lost but replaced with a freak bored gloss black one. I still have the original stove pipe feedneck that will come with it.
Upgraded what would have been a standard nickle/chrome plated WGP lpr and STO ram with the original release of this generation to a gen 3 wavy Belsales lpr, Nexus ram, and plated QEVs seen on later versions of the 03 Eblade. 05 Ego cut grips to fit around clapper noid.
She was definitely a players marker and deserves to be ran on the field, I don't give her the attention she needs. The board in it is an early version of the OLED Tadao and the screen is dead, I attempted to follow the instructions from a manual I found to try to program it to 10.2 without being able to read anything on the screen but haven't tested it on the field.
Would highly suggest a good once over on the regs and ram but dry fired just fine. I believe I replaced the lpr's reg seat prior to installing the lpr onto the body. I would also suggest picking up a new cup seal if the buyer plans on running it and not just wall hanging it, it has the original lowers and recently all my cup seals on my Eclipse and Evo cockers have started failing over the course of this season.
sold, not shipping out of the US
Was told it came from a Bushwacker in who got it from the Eclipse tent. Original ano matched Excel barrel was lost but replaced with a freak bored gloss black one. I still have the original stove pipe feedneck that will come with it.
Upgraded what would have been a standard nickle/chrome plated WGP lpr and STO ram with the original release of this generation to a gen 3 wavy Belsales lpr, Nexus ram, and plated QEVs seen on later versions of the 03 Eblade. 05 Ego cut grips to fit around clapper noid.
She was definitely a players marker and deserves to be ran on the field, I don't give her the attention she needs. The board in it is an early version of the OLED Tadao and the screen is dead, I attempted to follow the instructions from a manual I found to try to program it to 10.2 without being able to read anything on the screen but haven't tested it on the field.
Would highly suggest a good once over on the regs and ram but dry fired just fine. I believe I replaced the lpr's reg seat prior to installing the lpr onto the body. I would also suggest picking up a new cup seal if the buyer plans on running it and not just wall hanging it, it has the original lowers and recently all my cup seals on my Eclipse and Evo cockers have started failing over the course of this season.
sold, not shipping out of the US
Comment