Pre dye Carter buzzard -$950 shipped obo
taso threaded stainless snub and ported barrel (not bored for inserts)
corian grips w/ non standard screw hole pattern
carter L stock, new standard bottom line spacing
adjustable Carter bolt (uses prong style velocity adjuster, not included)
cci power tube/ lapco cup seal
cram and jam feed
rat attack 12 gram changer
skorr autotrigger plate
plastic Wgp trigger shoe
Quirks: the Skorr autotrigger works but there is no over travel trigger stop. So if you pull the trigger all the way back the auto trigger won’t function. If you hold down the trigger down a little it works perfectly and is perfectly timed. So if you’re comfortable drilling and tapping for a trigger stop then it’s an easy fix.
also the 12gram changer likes to be almost completely empty before changes because the threads bind under pressure due to the weird oring relief cut and loose tolerances Carter did on the threads
again it’s not bored for inserts so, you’ll have to figure out a situation for the rollouts and better velocity.
like all carters make sure you put it together the same way you took it apart to keep everything lined up properly
taso threaded stainless snub and ported barrel (not bored for inserts)
corian grips w/ non standard screw hole pattern
carter L stock, new standard bottom line spacing
adjustable Carter bolt (uses prong style velocity adjuster, not included)
cci power tube/ lapco cup seal
cram and jam feed
rat attack 12 gram changer
skorr autotrigger plate
plastic Wgp trigger shoe
Quirks: the Skorr autotrigger works but there is no over travel trigger stop. So if you pull the trigger all the way back the auto trigger won’t function. If you hold down the trigger down a little it works perfectly and is perfectly timed. So if you’re comfortable drilling and tapping for a trigger stop then it’s an easy fix.
also the 12gram changer likes to be almost completely empty before changes because the threads bind under pressure due to the weird oring relief cut and loose tolerances Carter did on the threads
again it’s not bored for inserts so, you’ll have to figure out a situation for the rollouts and better velocity.
like all carters make sure you put it together the same way you took it apart to keep everything lined up properly
Attached Files
Comment