My favorite anno on a Spyder. The Speedmaster was made prior to the SE (the SE was copied on a compact body as opposed to the original Spyder body this was built on) by Paintball Heaven and OEM'd by the same people as Kingman. It's got basically all the same parts with a few minor differences (shroud has circular cuts that are kind of rough rather than rectangular ones, and expansion chamber connects to the body with a 1/8 NPT fitting rather than screw into an ASA).
I got this example in a lot with some other stuff. I've tried to picture all cosmetic wear but if you'd like more pictures please ask. The biggest issue is the corrosion and bubbling paint on the frame, but there's also some rust on the screws and other steel parts, and some of the coating (bluing?) was worn off when I put the parts in vinegar to remove the rust. Also a bit of wear to the bolt where it looks like it was rubbing on the body.
Valve and hammer orings have just been replaced with factory spec and a new larger ball detent. Shoots fine, no leaks. Was just chrono'd to 280-290 fps on 800psi HPA and a stock barrel from an original Spyder with plenty of adjustment room left on the thumb adjuster rva. Also dry fires fine.
Will include a basic rebuild kit with the old detent (a bit bent, but still might work with larger paint), a set of valve orings, a hammer oring and 2 flat nylon disk seals for the metric fittings. No barrel included.
Asking *SOLD $50 CAD SOLD* plus shipping OBO. I access the site through Tapatalk, which has a monthly limit on photos. If you'd like pictures check out this ad in the Canada BST or shoot me a PM.
Sent from my Pixel 4a using Tapatalk
I got this example in a lot with some other stuff. I've tried to picture all cosmetic wear but if you'd like more pictures please ask. The biggest issue is the corrosion and bubbling paint on the frame, but there's also some rust on the screws and other steel parts, and some of the coating (bluing?) was worn off when I put the parts in vinegar to remove the rust. Also a bit of wear to the bolt where it looks like it was rubbing on the body.
Valve and hammer orings have just been replaced with factory spec and a new larger ball detent. Shoots fine, no leaks. Was just chrono'd to 280-290 fps on 800psi HPA and a stock barrel from an original Spyder with plenty of adjustment room left on the thumb adjuster rva. Also dry fires fine.
Will include a basic rebuild kit with the old detent (a bit bent, but still might work with larger paint), a set of valve orings, a hammer oring and 2 flat nylon disk seals for the metric fittings. No barrel included.
Asking *SOLD $50 CAD SOLD* plus shipping OBO. I access the site through Tapatalk, which has a monthly limit on photos. If you'd like pictures check out this ad in the Canada BST or shoot me a PM.
Sent from my Pixel 4a using Tapatalk
Comment