Diablo Mongoose 2

[Trbo323]

Yes the noid will just plug into the board

Another thing about these older stbb is sometimes a regular 9v just won't cut it, even a brand new brand name battery can have problems, sometimes you just need that 9.6v spyder battery

Trust me, I've tried everything in the book. 9.6 battery, replace the hammer spring, new capacitor... Multiple new capacitors, a different 9.6 battery, Polish the sear, Polish the hammer

It has to be either the noid or board

Sent from my motorola edge 2024 using Tapatalk

[Psycho91]

Sorry man the one I have seems to be dead like yours, will power up and the board registers the clicks cause the shot counter is going up on all the modes but the noid doesn't click, and I'm pretty positive that is a good noid cause there was a battery and all in the grip of the other frame I was probably messing around with it making clicky noises when I first got it 😂

[Trbo323]

Dang

Sent from my motorola edge 2024 using Tapatalk

[Psycho91]

No other spyder lcd board will work or are they specific to that frame, I don't get why the board would just do that then again idk shit about circuit boards

[Jsc5150]

Check the big capacitor on the board.
If it isn’t a perfect cylinder it is blown and needs to be replaced

[Trbo323]

No other spyder lcd board will work or are they specific to that frame, I don't get why the board would just do that then again idk shit about circuit boards

I'd have to go open it up again, it's been sitting on my shelf for at least 6 months but I usually have a lot of spyder stuff around so I would bet that I checked to see if the board was compatible with any of the spyder boards I had.

I do know I can't swap a spyder frame on, there was something wrong with that I remember trying. And the noid was a different size, not by much, if it comes down to it I can clearance the frame to get a spyder noid in

Sent from my motorola edge 2024 using Tapatalk