Piranhas, Tippmann Pro-Lite, BE Raptor, PMI Trracer, JT Tac-5
Prices don’t include shipping. PayPal please. Send me your offers! More pics available upon request.
Each piece will be wrapped in bubble padding and gaps in the box will be filled so your items arrive in good condition.
JT Tac-5 Recon - $25
$SOLD$ Black G2 Piranha - $SOLD$
$SOLD$ Tippmann Pro-Lite $SOLD$
$SOLD$ Brass Eagle Raptor $SOLD$
$SOLD$ PMI Trracer $SOLD$
$$$SOLD$$$ Piranha EVO Gold/Pewter fade - $$$SOLD$$$
Each piece will be wrapped in bubble padding and gaps in the box will be filled so your items arrive in good condition.
JT Tac-5 Recon - $25
- 8” Spyder-threaded stock barrel with muzzle break
- 13” Spyder-threaded stock barrel with porting at the end + muzzle break
- Carry handle, removable
- foregrip, removable
- top & bottom picatinny rails
- Parts kit - main spring, oil, cup seals/pins, rear bumper, detent
- Airs up & cycles fine without leaks. Clocked in at ~270-280fps last summer when it performed on the field. No adjustments since.
$SOLD$ Black G2 Piranha - $SOLD$
- Stock 8” barrel
- Drilled out stock front plug - now it’s a volumizer. There’s a big scratch on the volumizer.
- Drilled & tapped front block w/pressure gauge (0-1500psi)
- shortened trigger pull (shim under trigger return spring)
- Beaver tail (also included: original top rail w/dovetail)
- Upgraded rubber grips (also included: original grip scales)
- Spare brand new sear included (not pictured)
- Red main spring
- Airs up, no leaks. Cycles without issues. Last summer she clocked in at ~270-280fps. Haven’t adjusted it since.
$SOLD$ Tippmann Pro-Lite $SOLD$
- Stock internals
- Low serial number - 1302!
- 15.5” barrel w/spiral porting. Outside is beat & scratched, bore is still gorgeous.
- o-ring kit
- 2-point sling
- Gun is cosmetically pretty nice for its age - the anno is really well preserved. A little rust on some screws and sling mounts, but it’s minimal.
- Airs up & cycles without issues, no leaks. Last summer it clocked in at ~240-250fps. Might need a new main spring?
$SOLD$ Brass Eagle Raptor $SOLD$
- very few scratches or dings
- stock 9.5” unported barrel
- 14” gloss black Taso Terminator barrel. Bought new (old stock) last year, had a bit of anno flaking off the threads. Otherwise it’s cosmetically perfect. Maybe 500 shots through it. Considerably quieter than the stock barrel!
- original wire detent
- O-ring kit
- New hose-to-asa adapter last year
- Tippmann bottomline asa. This didn’t have an asa when it was purchased at a yard sale 😢
- Airs up & cycles without leaks. Clocked in at ~270-280fps last summer. No changes since.
$SOLD$ PMI Trracer $SOLD$
- Adjustable front bolt - no need to swap springs to adjust velocity!
- Stock unported barrel
- Original Euro grip
- Top dovetail rail
- A few scratches or dings at back tank asa and rail
- Two spare anti-double feed springs
- Dummy detent & barrel spacer installed - one finger is broken off but the detent still works perfectly
- Four (4) spare Dummy detents and three (3) spacers - someone has purchased some of the pictured detents separately.
- two spare cup seal o-rings (not pictured)
- clamping plastic 45 feed elbow - white Armson and smoke VLbow both fit well. The others not so much, but if you want one of them instead I’ll throw it in.
- 12g changer that has been wrapped in hockey tape for grip and extra stealthiness
- Airs up & cycles fine without leaks. Clocked in at ~270-280fps last summer when it performed well on the field. No adjustments since.
$$$SOLD$$$ Piranha EVO Gold/Pewter fade - $$$SOLD$$$
- 12” original spiral-ported barrel. Some scratches/wear at the tip. Bore is still nice and shiny.
- Boss bolt (delrin, wide open bolt)
- Boss Blade II aluminum trigger (2 points of adjustment). Not anodized.
- CP clamping feed neck
- ScenarioDreams T-Board (manual is here). 8 firing modes, adjustable dwell/debounce/rof, upgraded eyes & solenoid - eyes were tested and they work. Stock board only supported semi, so it had to go.
- Stock plastic trigger is included.
- Original grips included. The Piranha grip scales typically turn white with age 😄
- New detents installed yesterday.
- I may have a spare hammer o-ring and the original electronics somewhere. Will include these if I find them.
- Airs up, no leaks. Couldn’t get it to cycle consistently. Could be a worn sear, and I don’t have an extra sear for the e-frame
Comment