High-flow Spyder Victor. Was a project last year, but letting it go. Needs a little work to get it running. There's a couple dings near the top of the top tube, but otherwise looks good.
-black rear cap
-Kapp foregrip
-drilled out front block
-Bob Long volumizer
-Magnaport valve
-12" CP barrel
-Brand new Lapco feedneck (held a hopper only twice)
-plastic bolt (dunno brand)
-polished hammer
-medium valve, weak hammer springs
-full trigger job (pre, post, and side/side travel)
The idea was to make a high-flow Spyder & spring it rather than regulate it. It shoots, but there's a couple issues. It doesn't recock fully- just sort of hangs up at the tip of the sear on the rearward stroke. I think I either took too much material off the hammer or the pre-travel job on the trigger needs to be reversed (easy to do, I can help with it via PMs). There is also a leak from the valve area. I'm thinking it's either a bad cupseal or I sheared a valve o-ring on installation. I don't have time to finish it up, so it's sold as-is. Good base for a good Spyder. Also includes the silver rear cap, silver twist-lock feedneck, random stock barrel, spare springs, cupseals, original valve and spare brand new detent.
Price: $75 shipped CONUS, AK & HI. TRADED.
Piranha SRT with E-Force frame. I got this thing not working. The frame powers up, but accepts no inputs from the buttons. Assume the wiring or board is shot. A mech frame would fix this nicely. Assume it needs a rebuild. Has flush-cocking system. Sold as-is.
Price: $35 shipped CONUS, AK & HI.
-black rear cap
-Kapp foregrip
-drilled out front block
-Bob Long volumizer
-Magnaport valve
-12" CP barrel
-Brand new Lapco feedneck (held a hopper only twice)
-plastic bolt (dunno brand)
-polished hammer
-medium valve, weak hammer springs
-full trigger job (pre, post, and side/side travel)
The idea was to make a high-flow Spyder & spring it rather than regulate it. It shoots, but there's a couple issues. It doesn't recock fully- just sort of hangs up at the tip of the sear on the rearward stroke. I think I either took too much material off the hammer or the pre-travel job on the trigger needs to be reversed (easy to do, I can help with it via PMs). There is also a leak from the valve area. I'm thinking it's either a bad cupseal or I sheared a valve o-ring on installation. I don't have time to finish it up, so it's sold as-is. Good base for a good Spyder. Also includes the silver rear cap, silver twist-lock feedneck, random stock barrel, spare springs, cupseals, original valve and spare brand new detent.
Price: $75 shipped CONUS, AK & HI. TRADED.
Piranha SRT with E-Force frame. I got this thing not working. The frame powers up, but accepts no inputs from the buttons. Assume the wiring or board is shot. A mech frame would fix this nicely. Assume it needs a rebuild. Has flush-cocking system. Sold as-is.
Price: $35 shipped CONUS, AK & HI.
Comment