WTB Special Ops Longbow magazine and its' adapter

[Airtillery]

I'm searching for any Special Ops Longbow magazine adapter that will allow the use of the Longbow tubular magazines within the hopper port of the Tiberius / First Strike T9 series markers. If anyone has one or knows of anyone that has one or more for sale, please let me know. I would gladly take it off your hands.

I'm also looking to see if there is anyone that has the skills, and service to possibly modify "The MAK" - CCI Phantom Magfed Adapter Kit (https://www.paintzapper.com/mak) to connect onto the hopper port of a T9 / 9.1 marker? This magfed kit allows one to use any Tipx, Zeta or similar mag as an additional alternative source to feed projectiles, traditionally designed for the CCI Phantom launcher. But I am looking to see about having one modified to work on a T9 / 9.1. I'm actually surprised someone hasn't already made a 3D printed to do the same thing as "The Mak", but for the T9 / 9.1.

Thanks and appreciate any info on the aforementioned...

[Grub]

I believe I have the adapter, won't be able to check until next week unfortunately.

grub

[Airtillery]

I believe I have the adapter, won't be able to check until next week unfortunately.

grub

Hey man, thanks for replying. No great hurry. When you have a chance please let me know if you have and if you don't mind too much, please drop in a image of it. As well as how much you want for it? Thanks again and look forward to your return reply!

cb

[superman]

I have a mag adapter and 1 magazine from a tacone mag if that will work.

[Airtillery]

I have a mag adapter and 1 magazine from a tacone mag if that will work.

Hey there, I really appreciate your replying to my post. May I see an image of it to be sure as it may work? Here's an image of what it looks like, that I got from someone that had one for sale, but haven't been able to get back in contact with him.

Thanks...cb

[superman]

Here you go.

https://imgur.com/a/c0rr07u

[Airtillery]

Here you go.
https://imgur.com/a/c0rr07u

The Longbow mag adapter you have is very close to that of the adapter for the T9.1, but it would need some modifications to make it work. Namely the way it connects in to the hopper port. For in the T9.1 adapter as can be seen in the images above, there are screw holes for it to bolt onto the T9.1, whereas on the Tacone, it uses a rail latch to lock it in place. You would have to either knock off that part (rail latch) that cinches the adapter to the Tacone p neeic rail. Or put on a rail on the T9.1 to accept the LB adapter as is and somehow close the gap between the hopper port and area of the adapter that hovers over the hopper port. But not sure how that would affect the rounds feeding into the hopper port with that slight gap / space between the adapter port wall and T9.1 port hole body. If I had a machine shop or the tools to do this I bet I could get it to function. Any thoughts, if you don't mind saying?

What would you want for the LB mag & adapter? Was it painted green or is that the color it came in?

Thanks again for taking the time to provide the image and response!

[superman]

It was painted. My guess is with out having both in hand milling the bottom off and drilling and tapping some holes you should be good to go.


Sent from my iPhone using Tapatalk

[Grub]

Pretty sure mine is the t9.1 adapter but like I said I won't be home until tomorrow to get you a pic