Lever changer with stock

[Jonnydread]

Hi all,

Looking for a 12g lever changer with stock for a friend. Hoping to keep it around $100, but in better shape than the CA on Bacci’s site.

Anyone got something?

[Grendel]

Micro CA II are great that is what I use on my Springfeed Phantom. Talk to Slim he made a reinforced tube for it if you start to show cracks. I've had mine for 30+ years without issue but some people had the tube crack.

[Jonnydread]

What about replacement seals? I’ve heard they’re tricky to come by

[Grendel]

You can use Automag valve seals and I have worked out a "prototype" check valve/spring if you want one. I just need to follow up on ordering some stainless discs and springs, I already have the seal material. That is if you have the hold down nut but I can measure mine and come up with one if you need it. For the pierce pin I have used random o-rings in a pinch too. Because you have the leverage of the long lever and cam wheel the pierce seal is pretty forgiving.