Wtb qev orings

[Gsav22]

O-rings for a Pe qevs or does anyone know the size

[Brads41789]

O-rings for a Pe qevs or does anyone know the size

AUTOCOCKER O-RING SIZES

AS568 SIZE : ID x SC [mm]; DURAMETER
Old Valve Guide sticking ring: 12.0 x 1.00; 50 or 60
003 3-Way: 1.42 x 1.52; 40[*]
006 fill nipple: 2.90 x 1.78; 90
008 WGP Regulators: 4.47 x 1.78; 55
010 Ram shaft o-ring: 6.07 x 1.78; 70
012 Valve Guide o-ring: 9.25 x 1.78; 70
015 Standard: 14.00 x 1.78; 70 [@] (get lots of these)
112 Robust: 12.37 x 2.62; 70 [@] (used on regs etc)
113 Big O-ring: 13.94 x 2.62; 70 (used on some parts)
Lucky 15 barrel: 21.00 x 1.00; 70

Info:
*: Polyurethane o-rings suggested.
@: Polyurethane 40-60 o-rings suggested for bolt o-rings.

OTHERS
(AS568) SIZE: ID x OD x HT [mm]; DURAMETER
Eclipse Qev Rubber disc: 3.5 x 7.00 x 0.75; 70
ANS Cocker Valve disc: 7.0 x 12.0 x 1.50; 90 or 100


I believe the oring you are looking for is the Eclipse QEV rubber disc that squeezes between the ram and the QEV. In the past when I lost them or ruined them I just used blue loctite to hold them in place