Looking to purchase mech ion mounts for Smav-3
Announcement
Collapse
No announcement yet.
Mech ion mount
Collapse
X
-
Originally posted by Terry A. DavisGod said 640x480 16 color was a covenant like circumcision.
- Likes 1
-
If you have a printer you could make one too
Mount for SMAV-3 on a Smart Parts Mechanical Ion Conversion (v6)Design features include: Rail for easy height adjustment via the groove originally used for the electronics mainboardSingle large mount hole for m4 x 16mm screw (requires a slight mod to allow for the Pan head to clear the inside of the grip, use an equivalent set screw to avoid modding grips/chop the head off and cut a slot for a flathead screwdriver.) Inverse mount holes for your grip panel screws to anchor the mount (optional, needs a swap to Pan Head 6-32 x 3/8 screws)Angled rear to allow for more stabilization against the grip frame2025 update:There have been far too many people not adhering to the licensing agreement. The v6 model will only be available via purchase and the new v7 will be available soon on my Square shop.Velcor will save us...
Current MCB Feedback : https://www.mcarterbrown.com/forum/b...opusx-feedback
Legacy MCB Feedback (Wayback Machine)
- Likes 2
Comment
Comment