I am putting together a q-loader setup for my Classic RT and am in need of one of the AGD Warpfeed powered plugs so that I can feed from the bottom.
-
- Description
-
ManufacturerAirgun Designs
-
AGD has them new on their website for $9. I bought one to run a Qloader on my classic RT as well. Works well with the plastic elbow that comes with the Qloader kit. Just need a little electric tape around bottom of the feed tube to secure the plastic elbow.Attached Files -
-
I haven’t played with it in a game but I’ve run a couple of the pods through it with a pretty fast RT (faster than I would use in a game) and haven’t had any issues with it keeping up. Pretty cool to watch the pod empty when RT-ing it. I’d suggest a level 10 bolt if you don’t already have one. You start getting some chuffs at the end of the pod when the last couple balls are working their way in from the tube. The metal mounting bracket that comes with the kit mounts nicely using the 2 screws that hold on the foregrip. For reference that’s a 16” autococker barrel in one of Doc’s barrel adaptors.
If you haven’t seen it someone did a very nice write up on the Qloader system and setting them up in the forums. When mine came I just let it ride and everything seems to be working as intended. A good resource though if you have any issues.
Good luck!Comment
-
Are the warp fed plugs longer and different?
I converted the matching parts to center feed so I have this left over if you want it. I will never use it. PM me your address, I’m running out to the post office today. You can have it.Attached FilesComment
-
-
Yes the warp feed plugs are longer to fill up the feed tubeAttached FilesComment
-
Comment