Wtb CP vert reg bottom piece

[evilfishsticks]

I had one of those long cp regs that only takes straight fittings and in my infinite wisdom and minimal lathe experience, decided I could chop off the excess to get a 90 fitting on it. Welp, I magically screwed up the threads that screw into the other half of the reg. So, I'm looking for a replacement. Color irrelevant. Not sure if the bottoms are interchangeable but I'd take the short version or the long if they are.

[bouford]

doh, they should be interchangeable. hope someone has a spare they can get to you. gl!

[nobbie333]

You can take the bottom half and cut it down for a 90-degree fitting

[evilfishsticks]

You can take the bottom half and cut it down for a 90-degree fitting

I attempted that and I messed up the other threads that go onto the rest of the reg.

[evilfishsticks]

Still looking.

[Mr.]

Lets see pics on how bad the threads are

[evilfishsticks]

Mr. I was apparently pushing too hard with the cutting tool and the thin metal i was clamping to deformed and then the cap popped out and w edged itself between one of the jaws and the tool. It only took a split second to mess up. It's probably salvageable but it's going to look like crap.

[Mr.]

Def smoked haha