The Automag MFG mod is a service that turns your classic Airgun Designs Automag or Minimag into an FSR and roundball capable magfed marker. Automag MFGs are compatible with Dye DAM and Planet Eclipse magazines and come with your choice of either AC or A5 barrel threads.
This mod comes with a lifetime warranty that covers all craftsmanship related issues. If your gun isn’t working or feeding properly because of something I did, I’ll make it right. And if it’s your fault its not working, I’ll probably still hook you up, anyway.
HOW TO PLACE AN ORDER
First, leave a comment on this thread stating your wish to be placed on the waiting list. Then PM me your mailing address and an alternate contact such as an email and/or phone number. Be warned, wait times for these mods are typically quite substantial as I do have a day job and each of these mods require an obscene amount of work to complete. When your turn is coming up, I’ll notify you to ship your gun to me.
There is no deposit required to place an order, and no payment is due until after your gun has been completed, thoroughly tested, and is ready to ship back to you. The cost of the MFG mod is $309 plus shipping. If you’d like to provide your own AC barrel adapter and/or Dye magwell to bring the cost down for yourself, I’ll be happy to accommodate.
WHAT YOU NEED
Not all AGD markers and parts will work for this mod. Before you send me your Automag or Minimag, be sure to check the following;
1.) Must have a stainless steel twistlock body that is not pump milled. (Roughly 40% of twistlock bodies came with pump milling from the AGD factory, so if you’re not 100% certain what pump milling looks like, please ask before you ship!)
2.) Must have an unmilled classic AM/MM rail.
3.) Must have an uncut classic carbon fiber frame. The trigger guard must be intact.
Additionally, any AGD bolt and valve (excluding the Classic RT valve) will work just fine for this mod. ANS Venturi bolts will also work provided the foamie is not missing.
EXTRAS OPTIONS
Here are a few additional options I now offer with the MFG mod:
- MFG Twistlock Barrel Mod: $5
Got a twistlock barrel you think would be perfect for your MFG? Ship it to me along with your gun. A shallow hole drilled just in front of the feedport of your favorite twistlock barrel will allow you to replace your AC threaded adapter while still retaining its full compatibility with your traditional hopper fed classic Automags. Keep in mind, though, the modded barrel can only be removed from an MFG with a hex wrench. Yeah, it’s not for everybody, but it’s how I prefer to run my personal MFGs.
Weaver Rail Mod: $45
If you have a scope that you’d like to use on your MFG to get the most out of your FSRs, then this is a must. These rails are far more stable than those old Automag sight rails that slip from side to side no matter how hard you tighten them down. Fits my Supremacy scope perfectly.
- Valve Service: $20 labor plus parts
Air leaks? Velocity issues? Not firing at all? Don’t feel like dealing with it? Let me know and I’ll get your valve cycling like new again. $20 flat labor fee plus parts at cost.
Comment