Mech PMR project.

[Macdave06]

Just as I'm coming to the end of my pump PMR project I came across this camo PMR body on ebay. Messaged the guy to see if he had a bolt kit and sure enough, so here we are. Shortly after with a little more browsing I came across an Angel A1 frame.
Still waiting on the frame to show up, but the plan is to make it walkable, running an msv-2 into a pavo-3.

First step is going to be making a manifold. The port that feeds the solenoid is at an angle and they're pretty close together so that seems like the best solution. I'm thinking I might either cut an oval on the body side of the manifold to offset one port, or possibly have one side thicker to bring the port out at a 90 further over.
I need to order a manifold gasket at least to use as a template. Probably use a mag VASA like on the pump to mount an LPR to feed the msv-2
Pics:

Sent from my SM-G960U1 using Tapatalk

[Macdave06]

Got the frame today. I'd say it's right at home on there. I'm thinking maybe a dm4/5 VASA.

Sent from my SM-G960U1 using Tapatalk

[Señor Leo]

I'm stoked to see this up and running. I've recently become a PMR fan and had been wanting to see a mech one built. I had seen a mech build a while back but not sure where the thread was

[Macdave06]

I'm stoked to see this up and running. I've recently become a PMR fan and had been wanting to see a mech one built. I had seen a mech build a while back but not sure where the thread was

I haven't seen a mech PMR yet. Was it the same guy that did the mech matrix?

Sent from my SM-G960U1 using Tapatalk

[Señor Leo]

I haven't seen a mech PMR yet. Was it the same guy that did the mech matrix?

Sent from my SM-G960U1 using Tapatalk

I'm not sure, I've searched up and down and can't find the thread anywhere. I'm thinking it was either on pbn or the old mcb

[Macdave06]

I'm not sure, I've searched up and down and can't find the thread anywhere. I'm thinking it was either on pbn or the old mcb

You might be thinking of my pump?

Sent from my SM-G960U1 using Tapatalk

[Macdave06]

Playing with this a little today since I have the day off. Got a backing plate made for inside the frame and a template for the manifold. Gonna start chopping this chunk of aluminum into something that resembles a manifold.

Sent from my SM-G960U1 using Tapatalk

[Macdave06]

Might have to shave it down after I get a gasket but I have a manifold!

Sent from my SM-G960U1 using Tapatalk

[Brianeric26]

Nice looking forward how did you made the manifold with a drill and some taps ?

[Macdave06]

Yup. Scribed out some lines. Drilled about half way from the top and then in from either end to intersect those ports.

Sent from my SM-G960U1 using Tapatalk

[Macdave06]

Finally found a trigger for this thing. I also ordered a clippard MAVO-3 to use with an MPA-3 as my mechanical "solenoid". Need to find some sort of vert asa with a tail. Thinking maybe one from a shocker nxt.

Sent from my SM-G960U1 using Tapatalk