Not having any luck finding one of these on the web. Any of you mad scientist try making one of these yet?
-
-
Rainmaker's feedback: https://www.mcarterbrown.com/forum/b...maker-feedback
-
YesComment
-
If you have dimensions, this could be a candidate for 3d printing, as it looks like a stationary part with orings... do you have an existing flow plug you could measure?Rainmaker's feedback: https://www.mcarterbrown.com/forum/b...maker-feedbackComment
-
No, unfortunately not! My son just printed me 2 eye pipes that worked great tho. Iām not against itComment
-
I have one in my dm6. I'm assuming they are the same.
Really the easy solution is to take out the on/off and shave off the knob then lock the set screw all the way in so it can't turn
I'll measure if you want though
Rain can the plastics hold back 200ish psi? I'm a little concerned about that
Sent from my motorola edge 5G UW (2021) using Tapatalk
I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.
Feedback
https://www.mcarterbrown.com/forum/b...323-s-feedbackComment
-
I actually have one in the mail. However according to CP they are different. They still sell them for the 6&8 but not the 7šComment
Comment