Anyone up for taking on a very small project?

[lew]

Howdy,

I need a couple or four Shocker Sport on/off switches for the later LS boards whipped up. I made one out of Kydex that works fine, but I don't like the way it looks, and I'd like some extras. I can send a switch to be copied if you need it.

Cheers!

[Rainmaker]

Could you post a pic of the kydex one you made? Or a stock one? I'd be willing to make that for you, just curious how big the piece is (I'm picturing a tiny electronics switch).

[lew]

I'll get some pictures and dimensions tomorrow of an original. The switch (slider) is only about 3/4" long and 1/4" wide with a longitudinal slot so it can ride in a cutout in the circuit board housing.

And thanks for responding!

[Jordan]

Somebody was 3d printing them, on the Brick Shocker Facebook page.

[lew]

Jordan, thanks for the info, but I don't do facebag, so that may as well not exist as an option for me. Push comes to shove, I'll make an ugly yet functional example out of the aforementioned Kydex.

[Rainmaker]

Jordan thanks for the tip! I contacted a couple guys on that group this morning to see if they'd be willing to share the file. If that works out, it would be easy peasy! If not, lew we can work out for you to send me your switch and I'll draft it up. From the picture I found on the facebook group page, it looks pretty simple.

[lew]

It is super simple. Let me know what you need from me. I'm good for at least five, probably six.

Thanks guys!

[Rainmaker]

First iteration came off the printer today. Measuring and making a couple adjustments. Does it look like it's the right shape?

[lew]

It looks great!