SMAV-3 for the SP-1?

[The Inflicted]

I wouldn't normally ask if someone can copy someone else's work, but I've tried to contact Stanchy for months now with no luck.
I'm needing the little 3D-printed bit that anchors a SMAV-3 valve to an SP-1's grip mounting post.
Can anyone recreate this?

https://stanchy.com/products/sp1-mech-kit?srsltid=AfmBOoohtMwn5xGkPwFLBNEgHE_vqo7FKv9MGi DiAR8Ey2m2M7T3dEtp

[briaschu1]

I'd be interested in this part too as I mech'd my SP1 last year. I ended up drilling and tapping a hole in the frame and using a grub screw to sorta hold the SMAV-3 in place, it has held up the few times I have used it so far but I too would prefer a more solid placement.
I can take some pics this evening if you need.

[Cdn_Cuda]

I ended up using some sort of rubberized plug I improved to work my my SP1. Your proposed part would be much nicer to use.

[briaschu1]

Here is how mine sits, the grub screw just presses the valve against the side of the frame to hold it in place.

[ChoSanJuan]

I've had one sitting in my basement for over a year. I guess it's time to get to work!

[The Inflicted]

I'd still be really interested in this part. Got two dead SP-1s that need it.

[Myrkul]

It's not terribly difficult to just use aluminum stock from ACE to make a little "L" bracket. That's what I ended up doing with mech Ion with a non-standard frame. You can get pretty creative with the mounting brackets for these and they still work great.

BrickHaus should be able to get you pictures of the L bracket I made a few years ago.

[BrickHaus]

I'll see if I can't get the grips off that beast and snap a picture.

I've even seen drilled out pennies and jb weld used as a mounting bracket.