Sheridan pistol grip- could this be modified to have bottomline mounting holes?

[The Inflicted]

https://www.thingiverse.com/thing:3842939

I'm wondering if there's a way to take the core of this model- the pistol grip/stock, and modify the bottom edge to have recesses for nuts to allow a standard bottomline to mount to this.

[Carp]

You need to speak with Chemical-x.....ahain

[Chemical-x.....ahain]

as you can see I messed around with that programe for a while, the second pic does indeed have an actual ASA in the receiver. I had a hard time with getting the angle right so I opted for a stock and made tank brackets. FWIW i am dum. I am though self-taught in CAD, im running OnShape and its been a fun and fulfilling experience.

[Chemical-x.....ahain]

So Ive played two full scenarios with the ABS printed stock, chassis and tank rings. The setup has been incredible, I also have a printed dual feed plug thats made usage phenomenally better. The new plug ot a twin scoop that abandons the twist plug in favor of an elastic retainer.

So push the springs forward and lock then pull the plug and let it go. Drop your paint in and line up the plug and let go. No holding separate plugs, no twisting them, no need to remember right and left, no worry about locking them back in.

[chplnstone]

not 3d print, but p-frame adapt & umb?