Nasty Typhoon Qloader(s)?

[TarntKarntington]

Would it need dual loaders or could it work with one? What would it take to mount two under the barrels?

Is this a dumb idea? Is MCB the wrong place to ask if this is a dumb idea?

[XEMON]

I think you will need a second sets of biceps ...
1 Loader feeding 2 barrel seams a bit difficult to manage.

Is MCB the wrong place to ask if this is a dumb idea?

MCB is the perfect place to find other dumb idiot thinking it's a great idea and support you, me included.
Please, go for it!

[Levi]

MCB is the perfect place to find other dumb idiot thinking it's a great idea and support you

As a fellow dumb idiot, I fully support this idea!

[Levi]

You'll definitely want to use two independent Qloaders.

Obviously you'll need the pods and the pod loading socket. Beyond that, here's where I would start...

Grab two Custom Mounting Sockets (CMS). These sockets can be rotated to point the feed port any direction you need. They also accept a variety of different brackets.





Parts shown below from left to right - Low Rise Clamp Adapter, 90 Degree Low Rise Elbow, Quick Release Hose Adapter



Assembled like this:




Plus some hose to get to the Qloader socket:



Build one of these for each side and you should be in business.

[Levi]

Also worth a mention are the old school warp feed adapters:






Then there's always the basic Qloader plastic elbows:

[TarntKarntington]

Thank you for the pictures, very helpful!

[Levi]

Hey you're welcome! I assume you've seen our new friend in the dealer section selling off the old Qloader stock?

[TarntKarntington]

Indeed I did. Still on the fence because I don't need more projects... Though I do need a badass loader to really bring the nasty all the way over the top.

[XEMON]

Maybe we could pull an MCB group buy?

[JeeperCreeper]

Do dual loaders, but with pods cut down to 50 rounds each to help manage weight and girth

[Mr. Hick]

Are you really going to attempt to attach the two least easy to manage loader systems to what is most notoriously known as the least easy to maintain/keep functioning double barrel?

I think you need professional help - The mental kind. That type of masochism is dangerous if left untreated.

Edited to say: If you truly go through with your plan, send photos and video.

[JeeperCreeper]

Hey man, some people like good girls, and others like hood rat stuff 😆

I'm hoping to see a video of this thing come together

[Chemical-x.....ahain]

I've thought about this a few times and I think it may be possible with a switch gate like what you see on marble runs, however it may need to motor to switch side to side as the Q will want to apply pressure.

Anyway I just thought I'd toss out my idea.

[Chemical-x.....ahain]

Essentially this principal but not necessarily this particular piece however in looking at better I think it's got merit to being non motorized.

I think if the splitter was on top and parallel to the barrels it'd allow gravity to drop rounds into the breech.

If you wanted to mount it under you'll need a secondary force feed on each line. But up top the Q can feed to the toand gravity will do your bidding from that point on.