Invert Mini bolt on TIPX

[jokers]

I have no clue where this is coming from but I think i have seen or heard where the bolt from an invert mini, empire axe or any other of the 900 markers with that bolt will fit on a tipx.
I think it would need modified a lot and might not be worth it but for some reason I just can not get it out of my head that it works and come to all of you to help remember the lore that was lost.



f853228d1aa9b8c259a07ce829d1b4fd57ab36f4848c77470e24c990215fc7e2__36800.1691101342.386.513-456497944.jpgtipp-ta20109-2__38495.1391545828-3850584310.jpg

[jokers]

It may just be that the TIPX can use the spring from an invert mini and not the bolt if that is the case I think i have my answer.

[Frmrspec]

Completely different drive systems.. tipx drives off a center piston like a mag , mini drives the bolt forward off the back of the bolt. However they both operate off a pressure controlled piston to initiate the firing sequence

[Chemical-x.....ahain]

Make it a pump tipx and operate the bolt manually.

Then the drive system won't matter as much.

Removal of the bolt spring, and adding a way to interact with it is all I did. You'll have to mill the breech and side of the clamshell.

[Frmrspec]

The big question is what goal are you hoping to achieve? Tinkering for the sake of tinkering?

[Jsc5150]

Better project would be a level 10 style bolt

[jokers]

Well I was not really hoping to achieve anything but better efficiency at a cheap price since i have many invert mini bolts. A couple of them being delrin and couple aluminum and if they would work with just the back shaved and help then i would shave them and try it since they will not work I think i will shelve this thought and call the bolt good.