I have been trying to organize and downsize my collection of miscellaneous parts I have collected over the years. Some come from markers that have failed me in one way or another, others are from projects I have shifted gears on. This is going to be Nelson based (I have a Line SI lever that fits Nelson bodies nicely) I have done a few mock ups with different parts I have around the house. Some of you have seen pictures of what I am working on. I am posting this as a place holder to start putting pictures up.
The idea for this is to make a reliable daily driver for stock class games.
We have the air source figured out.
I have KPCS Nelson body I will probably be matching up to this.
Lapco #4 powertube for the lever changer
I need to adapt my RTR trigger frame to the body. The holes do not quite line up the way I was hoping. I have a LineSI trigger frame I could use but the other one says Gargoyle on it so there is that.
The grip frame could be a standard 45 block, the CCM 86 grip from the 2018 run or I have a Raw RTR grip from e from a different build available too.
I am not sure If I want to use a CCI one piece feed, Thumper feed, or the Lapco Grey Ghost feed I have.
Internal wise I have the CCI internals and a set of Lapco internal. I will probably go with whatever gives me the smoothest pump stroke.
Speaking of Pump stroke I have a Nelson Challenger kit on the shelf with that really low profile pump handle that fits nicely.
Barrel wise I am looking at Cocker threaded options mainly. but I do have a cocker to Phantom adapter (Thank you Rodney at RTR many moons ago) so I can use that for detents and then look at Phantom threaded barrel options.
Please feel free to share your suggestions and keep me moving forward on this. I know I will need to pick up some hardware and do a little bit of machine work to get this one done but is should be interesting when it is done.
The idea for this is to make a reliable daily driver for stock class games.
We have the air source figured out.
I have KPCS Nelson body I will probably be matching up to this.
Lapco #4 powertube for the lever changer
I need to adapt my RTR trigger frame to the body. The holes do not quite line up the way I was hoping. I have a LineSI trigger frame I could use but the other one says Gargoyle on it so there is that.
The grip frame could be a standard 45 block, the CCM 86 grip from the 2018 run or I have a Raw RTR grip from e from a different build available too.
I am not sure If I want to use a CCI one piece feed, Thumper feed, or the Lapco Grey Ghost feed I have.
Internal wise I have the CCI internals and a set of Lapco internal. I will probably go with whatever gives me the smoothest pump stroke.
Speaking of Pump stroke I have a Nelson Challenger kit on the shelf with that really low profile pump handle that fits nicely.
Barrel wise I am looking at Cocker threaded options mainly. but I do have a cocker to Phantom adapter (Thank you Rodney at RTR many moons ago) so I can use that for detents and then look at Phantom threaded barrel options.
Please feel free to share your suggestions and keep me moving forward on this. I know I will need to pick up some hardware and do a little bit of machine work to get this one done but is should be interesting when it is done.
Comment