Fun with knives (I did another thing!)

[William the Third]

Inspired by a semi-recent post by superman/Bearded Works, and the ATTKTX Gold Chamber, I decided to stick a Meteor pump guide on the lathe. I added a bunch of volume, and gave the air a better path to follow. I wanted to keep the two parts connected to aid in assembly. I didn't add the additional holes that Bearded Works did, as I don't currently have a way to drill them securely, and trying to hand drill them seems like a disaster waiting to happen. If I'm a little off I'll either cut into an o-ring gland or the threaded hole for the trigger frame.

[superman]

I thought about going this route with mine at first, but wanted to split it to get the extra flow through the spring perch section with the attktx piece.
Looks good though.

[Frmrspec]

Oh man that’s dodgy.. definitely would have drill it before turning it down. Hope it works out well for you

[superman]

you can do it in a collet block. you have to drill the 2 side holes so it isn't too bad.