POP enmy missed connections.

[BrickHaus]

Lets open this up with a huge thank you to Autococker04. Ryan is a saint in our community, and one of the handful of MCB members who has been in my home IRL.

Now. I ordered one POP entry. I got what looks like a mostly complete marker, and then a second one that is missing the back cap and most of the can assembly.

I see a few extra can assemblies in some of yalls pictures, and a few people missed out on this event. Lets make magic happen and connect some dots.

That being said, I wanted to start the "missed connections" thread.

Im up to donate what I have in extras to the cause if putting more of these beauties back into service.

All that being said. Im hella busy the next week, I have a work trip and a personal MTB trip stacked in the next 5 days. Ill have little time at home to ship anything, but this is a start to the conversation

Essentially the black body is most missing the can, and back cap assembly. Otherwise I think the rest is there. Ill donate and ship them to a third party is one of you will ship the remaining parts to said somebody also.

[autococker04]

Very good idea. I have 4 valve/solenoid assemblies that I held back - if anybody absolutely can’t get theirs to work, let me know.

[Reflex0283]

I have two but I plan on cutting it up a bit, I might need to hit you up later if I accidentally destroy one

[Myrkul]

If any of the valves/Solenoids are bad, I think you can also just drop an SMAV-3 into these because they are mech ions right?

I always hated the trigger pull on the eNMEy's but enjoyed how crisp the SMAV-3s are on mech ION builds.

[gnarlynick]

As I stated in my build log thread, I have

• 2 spare rear assemblies for the gen 1 bolt
• 3 gen 1 bolt stops
• a spare gen 2 outer body, inner body, & bolt (all appear complete)

I still have to disassemble all the regulators to see what's going on in those, but I will likely have 2 extra regs as well.

Also had a .50 cal breach reducer and what I believe to be a .50 cal barrel adapter included; nothing else .50 cal with the remaining parts.

Once I start 3D printing replacement pieces, I'll likely have 1 or 2 extra outer bodies, 2 triggers, 2 grips, 1 feedneck, and possibly 1 or 2 grip frames as well.

Pretty much everything to the left of the two assembled markers are the aforementioned spare parts:

[Calvin]

I thought I was missing a can from one of the bolt assemblies. I was scrubbing bodies this am after an all night hot soak, and realized it was welded into a body by old paint. I used a soft 1/2" poplar dowel and managed to get it out of there. I wonder how long it had been like that?

[gnarlynick]

You've disturbed it from its' final resting place.

[autococker04]

Haha there were a few like this, I couldn't figure out why I couldn't jam a full bolt assembly in there until I looked in with a flashlight.

[Hellion360]

I missed the POP sign up.I wrote a post in the "Potential Enmys for Pile o' Poo" thread but then I missed the follow up sign up thread after my heart procedure.

If anyone ends up with an extra bolts I am looking for some. I am working on automag/ion builds and need bolts to complete.

If anyone ends up with an extra almost complete set of parts I would be interested to participate in the build off.

[Rainmaker]

Are the bolts from the Enmey compatible with Ions??

[Magmoormaster]

Rainmaker I've done a lot of digging today and it appears the gen one bolts (the black ones) do work with Ions.

[Hellion360]

yes, gen1 bolts fit ion.
I have heard but not confirmed that gen 2 fit ion xe.

[OpusX]

We may need a secondary comp for "lost and found builds"

[Magmoormaster]

I have a gen2 bolt can. Sounds like all you'd need is a gen2 bolt cap and bolt stop and you'd be set.

[BrickHaus]

We can make sure and maybe we both send our respective extras to hellion. But im gone from home tim at least mid next week.

[Hellion360]

I see folks moving along on their builds.
Just reminding that if someone has spare 1st gen bolts I am in need of them for my ionmag builds. (2)

[tyronejk]

Sheesh, that's unfortunate. Sorry to hear that. Maybe it makes more sense in terms of accountability for me to buy single-oring bolts and sell dual-oring bolts in distinct transactions.

In any case, I'm posting what I have down below. You have first dibs on the bolt.

[The Inflicted]

Is there a difference between the Gen-1 and Gen-2 bolts? I know all the other components of the engine are different but the bolts themselves look the same.

[tyronejk]

Yep, gen1 and 2 bolts are different and not interchangeable

[tyronejk]

Here are spare parts I have to give up to the greater good. I've taken apart almost everything to individual components to show what's available. I.e. reg bodies empty but bolt engine is complete and so is the valve assembly. The hacked-up trigger frame has the trigger itself, pivot pin, safety button, safety detent ball, safety detent spring, and rocket thing.

$5 should cover shipping to anywhere in the continental US. If you're outside of that, we can figure out specific shipping cost.

In the interest of maximizing goodwill, I'd like the bolt engine assembly and valve assembly to go to someone who does not have a working gun yet. If everyone is squared away, then it's up for grabs.

[OpusX]

For those needing bolt stops to complete bolt firing assemblies, I found some in stock.

https://adrenalinepaintballairsoft.c...p-68cal-nm6110

[lhamilton1807]

I didn’t get a pile o poo this year but I may be in the market for some parts… subbing for later

[Magmoormaster]

I've been meaning to post the extras I have in this thread but keep forgettting to take a pic. Here we go:


-the incomplete gun has both inner and outter body, no bolt engine, no valve, no VASA, no feedneck
-the two regs are complete, minus the swivel and snap rings
-gen 2 bolt can
-gen 1 bolt cap

If anyone is interested in any of it, it's yours for the price of shipping!!

[Magmoormaster]

yup

[XEMON]

Dam il 😅
I blew mine out 😒

[Magmoormaster]

I think most of us have at this point