Spyder with a neat hardline set up.

[Ecapnation]

https://www.ebay.com/itm/29607816054...mis&media=COPY

[Trbo323]

Remind me, what's the MSRP of that HK army garbage that has the line go through the frame? This might be a better option

Sent from my motorola edge 5G UW (2021) using Tapatalk

[Ecapnation]

Hundred and something

[scottieb]

I see a screw on the passenger side trigger frame. I wonder what's going on under the grips?

[JeeperCreeper]

It's funny, I have thought about running an air line just like that, but decided not to because it would look like this

[scottieb]

lol @ "because it would look like this"

[The Inflicted]

Odd vertical ASA is from a different Spyder clone, presumably one that used a proprietary vertical foregrip.
Odd holes through the upper bolt tube, too. Looks like this was a testbed for various garage airsmithing projects.

[scottieb]

The front block on this one was used on many Spyders. A hollow foregrip with bike grip was there.

[Trbo323]

You know it would be kind of fun to get that plug the vertical ASA and do a side input straight through the body

Sent from my motorola edge 5G UW (2021) using Tapatalk

[Trbo323]

Odd vertical ASA is from a different Spyder clone, presumably one that used a proprietary vertical foregrip.
Odd holes through the upper bolt tube, too. Looks like this was a testbed for various garage airsmithing projects.

You're right it almost looks like somebody was drilling on it eventually regretted it and then added the beavertail top site to cover it up

Sent from my motorola edge 5G UW (2021) using Tapatalk

[scottieb]

You're right it almost looks like somebody was drilling on it eventually regretted it and then added the beavertail top site to cover it up

Sent from my motorola edge 5G UW (2021) using Tapatalk

I'm betting there are only two holes - one on each side of the body and they are both threaded. Those holes match the holes drilled in the site rail. For some reason or another the sight rail was in a different position and held with screws. Later it was moved and notches made for the pull pin and the rear section at the top removed.

That being said, I agree something's up with this one. The threaded hole towards the front of the sight rail has me scratching my head as does the screw and whatever else is on the passenger side of the trigger frame. I'm extremely curious.

[Brokeass_baller]

So which one of y'all bought it?