PMI2 - Feedneck Needs Repair

[Painthappy]

https://www.ebay.com/itm/285188211850

Labeled as a Magnum, but is a PMI2-DF if you ask me. Looks like a CooperT bolt and does have a nice bottom line setup.

Needs to be saved by someone that has the skills to save it.

[XEMON]

Labeled as a Magnum, but is a PMI2-DF if you ask me.

I woudl agree with you on that 👍
And the saving it 😁

[Carp]

With the zoom and rotate..... PMI2-DF it is not!....










...I'll go stand in the corner now.

[XEMON]

Dam ... someone soldered a feedneck on a magnum ...

[Carp]

That seller actually has 2 of them up for auction. Here's the other...

https://www.ebay.com/itm/PMI-68-Magnum-Paintball-Pump-Rare/285188207600

It has the normal removable feed block(that I'm use to seeing) with broken/missing elbow and an added auto-trigger. That removable feed block would look nice paired with a MAK adapter or a Phantom SC feed block.

[XEMON]

My magnum is setup for CCI feed block (forward and backward).
I mounted the MAC on it when i still had it, the issue is that it is a bit too far from teh breach and tend to clip the ball sitting in between the mag and the bolt.

[l.i caretaker]

There both mine. An yes there Magnums.