BBT Typhoon with Armson

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • un2xs
    Old Slow Fat Guy
    • Jul 2020
    • 570
    • Manhappening Kansas

    #1

    BBT Typhoon with Armson

    No Longer Available

    BIN $450 + $15 Shipping
    Make Offer enabled.

    Bad Boyz Toyz Typhoon - removable barrel Typhoon. Memory says a limited number were built, but do your own research. No barrel in photos, but has an Armson sight on top. Assume will need rebuild.

    https://www.ebay.com/itm/Palmer-Purs...r/154265272243

    Recently purchased a bundle or markers from local field owner and there are more projects than I have time right now. This marker has not been tested with air but has been sitting for a long time so I will assume it will need a rebuild and or parts replaced. The bolt does lock back when pulled and the trigger does release the bolt that is as far as I have tested it. I am not extremely knowledgeable on the PPS guns but this was identified by Glen Palmer as a Typhoon and I have been told it is the BBT Typhoon. Any questions I will do my best to answer, open to offers as I don't really follow the market on these very well just kind of used other ebay listings as a guideline. May have another Typhoon listing soon so follow my listings if interested.

    Last edited by un2xs; 01-01-2021, 10:00 PM.
  • pballer413!
    Newbie
    • Dec 2020
    • 20

    #2
    Thanks for the post, this is my marker wasn't really sure where the market was sitting on these so figured I would throw it up and allow offers to see if someone would set me straight.

    Comment

    • Jordan
      I. Am. Canadian. 🇨🇦
      • Jul 2020
      • 3508
      • Southern Ontario, Canada

      #3
      Probably a bit high, but... they're pretty rare, so that helps.

      Comment

      • un2xs
        Old Slow Fat Guy
        • Jul 2020
        • 570
        • Manhappening Kansas

        #4
        I found this post about BBT Typhoons.
        https://www.vm68.com/palmer/bbt_typhoon.html

        Until reading this I thought they took cocker barrels.

        Comment

        • Jordan
          I. Am. Canadian. 🇨🇦
          • Jul 2020
          • 3508
          • Southern Ontario, Canada

          #5
          Originally posted by un2xs
          I found this post about BBT Typhoons.
          https://www.vm68.com/palmer/bbt_typhoon.html

          Until reading this I thought they took cocker barrels.
          Not the BBT version... slip fit. I think Blazer barrels work.

          Comment

          • un2xs
            Old Slow Fat Guy
            • Jul 2020
            • 570
            • Manhappening Kansas

            #6
            Originally posted by Jordan

            Not the BBT version... slip fit. I think Blazer barrels work.
            That would explain the knob right side high.

            Comment

            • Ecapnation
              MCB Member
              • Jul 2020
              • 4332
              • South Central Long Island

              #7
              Not blazer.... 13/16 barrel end to end.

              Comment

              • Cunha
                Certified Post Whore
                • Jul 2020
                • 2102

                #8
                Correct. They do not take blazer barrels. Its easy to turn something down for them. They are rare, and cool.

                Comment

                • OpusX
                  Still pumpin'
                  • Jul 2020
                  • 1464
                  • KCMO

                  #9
                  Now if you could just get, perhaps Wally, to supply some of his tight bore titanium for a slip fit barrel....mmmmmm
                  Velcor will save us...

                  Current MCB Feedback : https://www.mcarterbrown.com/forum/b...opusx-feedback
                  Legacy MCB Feedback (Wayback Machine)

                  Comment

                  • Jordan
                    I. Am. Canadian. 🇨🇦
                    • Jul 2020
                    • 3508
                    • Southern Ontario, Canada

                    #10
                    Originally posted by OpusX
                    Now if you could just get, perhaps Wally, to supply some of his tight bore titanium for a slip fit barrel....mmmmmm
                    They sell it on McMaster-Carr.

                    Comment

                    • OpusX
                      Still pumpin'
                      • Jul 2020
                      • 1464
                      • KCMO

                      #11
                      Originally posted by Jordan

                      They sell it on McMaster-Carr.
                      Dont tell me these things...
                      Velcor will save us...

                      Current MCB Feedback : https://www.mcarterbrown.com/forum/b...opusx-feedback
                      Legacy MCB Feedback (Wayback Machine)

                      Comment

                      Working...