Icd lever changer face seal?

[Hero]

The face seal on my lever changer got a nick and won’t seal, anybody know where I can find replacements? Google doesn’t seem to help.

[RedLeaderSB]

Yea from ICD. Last time they sent me a whole goodie bag of seals when I asked.

[MullerTime]

Does anyone know if a standard bucket changer face seal like the ones off pgp junkies work?

[Chuck E Ducky]

Not the same they are thicker

[MullerTime]

Ah dang. Thanks for the info though.

[wthomas333]

I’ve used Sheridan seals in my Line SI quick changer. The seal was too big around so I just trimmed the edge and it worked fine. I thought the ICD changers were copies of the old Line SI ones, but I could be wrong.

[Chuck E Ducky]

Just email ICD there CS is great.

Have you tried flipping it over?

You can try Araphel he makes them he usually keeps them 🦭’s on him.

[$L!mBo]

ive had an issue with the newer icd units where the seal was too thick to pierce the cart, straight out of the packaging. shimming the cup, i was able to pop them, but only after working the lever back and forth a few times. and then, it would leak.
i tried many things but the only one that worked was VERY CAREFULLY shaving off ~1/3 of the seal. after doing this you will also have to shim the piercer spring to make up for the lost seal material. i use 1/4" washers

might work for you

[TouchofGrey]

Here is Contact info for ICD

Gary will take care of you if you wish

Gary Adams
Sales Manager
208-468-0446 v
208-468-6650 f
Indian Creek Design, Inc
www.icdproducts.com

[Myrkul]

FYI Per Gary, the face seal in the lever chargers is the exact same seal as the B2k cup seals.