Geo 3.5 issue help.

[Mps18]

Doesnt shoot the first couple pulls then shoots fine after, any ideas?

[ChuckLove]

Try installing a fresh Duracell battery to start. Next clean off all the old grease and replace the 015 and 14x2 orings on the bolt and apply fresh grease (not a lot). Make sure the dwell is set at 26.2 as well. If you are still having issues the solenoid might be getting weak. Try going into the hardware menu and putting the solenoid on medium or high output.

[Chuck E Ducky]

90% of the time it’s a battery issue make sure you are using a good name brand one.

[Mps18]

Ok thank you guys i forgot to mention i just swapped in a brand new solenoid ill try out these suggestions thanks!

[Chuck E Ducky]

Also Setting the restrictor too low (especially in extreme weather conditions) may result in: low velocity, inconsistent velocity or preventing the bolt from cycling. If this occurs try Increasing the SFR flow setting.

[ChuckLove]

Oh ya I forgot to mention that one.