Help with o ring kits

[Nixon_b23]

Hello again all! Used to post here a time ago but my profile was deleted. I recently came into possession of an evil pimp and an angel LED. I never thought I would even have an angel in my hands let alone own one. My question is where is a good place to pick up o ring kits for these markers. They've been sitting for over 10 years and I want them to run... Thank you in advance

[Cdn_Cuda]

Welcome back. In your absence the entire site fell victim to a ransom hack and we’re building it back up.

As for o-rings, personally I’m milking a large Dye o-ring kit for all its worth. Has most o-ring sizes I’ve needed.

Someone will chime in with a couple options of websites where you can order various sized o-rings and you can make your own kit.

[Carp]

Here's a couple options in this thread....O-ring thread, if you want to build you own kit/bulk-up.

Oh and welcome back! 😉

[Toestr]

I just purchased a bunch of orings from The Oring Store. Just find your oring specs and you can get them in the proper sizes, materials and hardnesses. You need to order minimum $1 worth of orings in each size (usually 5-20 orings depending on material, hardness, size).

I built a couple rebuild kits for my automag and a bunch of common size ones in various specs for general rebuild kits. These aren't colour coded or anything so you'll want to have some sort of organizer to sort them.


Sent from my Pixel 4a using Tapatalk

[imped4now]

Read: https://www.reddit.com/r/paintball/c...ef_source=link

You'll want the manuals and if they don't have proper seal callouts, you'll need to do some more research/dig a bit deeper....or remove each seal and use a combination of logic/measurement with calipers. Starting with the link I provided + ZDSPB.com will make for a good start.

[BenoitOWN]

If you want colored oring that’s fully embedded use Captain15 for 15% off captain oring website.

[Nixon_b23]

Thank you for all the input. The only manual I have is for the angel. The pimp was apparently early release for pros. The person I got them from used to play pro for blue's crew. Hence the blue's crew hammerhead barrel in the bottom of the pic. Hopefully there are callouts for the o rings in the manual as the angel is yielding nothing. I have however located a couple sites that have rings for the pimp including one on Amazon.