Value of old mask and old sniper

[Alexndl]

A friend of mine have couple of old mask and was wondering what would be a fair price for those.

clear Skull
good condition, foam and strap are not too bad
20210621_231341.jpg 20210621_231353.jpg


Two old JT flex
foam will need to be changed, lens too, forgot to check the strap condition
blue mouth guard is deformed since it was stored in a bag
20210621_231408.jpg 20210621_231422.jpg

[Alexndl]

This one is on the Not for sale list but we where curious to have more info on it and an apraisal

From what he remember its a OTP ano Sniper III
Had a ball detent added
anodising is a mix of light and dark green pattern
serial is 1467
20210622_073411.jpg
20210621_231441.jpg

[Chuck E Ducky]

The IZE blue mask can be worth a lot. But condition plays a big part. Needing foam sun faded with the amount of shell marks in that mask I couldn’t give you a price. The strap may be valuable as well if it’s not all stretched and dry rotted. I have seen a blue IZE sell for ridiculous prices but they won’t in that condition unfortunately.

[Alexndl]

Condition of the blue flex is not perfect and have seen a lot of use. But is it worth something?

[Jonnydread]

Oh man I haven't seen a SKUL mask in years, I used to think those were so badass when I was a kid.

[Carp]

I also, thought they looked cool and with the name "SKUL", made them even cooler..😎 I was just always too much of a JT "fan"boy to switch. The "design child" Grill mask, also always intrigue me, looks wise. I just never could justify, dropping $$$ or yet another mask.. When I had comfortable/functioning ones already. 😉

[Alexndl]

Any idea what was the value back then and what could be the value now?
Its the only one I ever saw and did not found more
Googlefu is hard on this one with soo many mask with a skull on (cheap airsoft version)...

[Grendel]

$300-$350 on the Sniper III, looks like in nice shape for age and being a players marker. Is the body anodized a marbled Green/Black? One side looks solid black while the other has some green (in the pictures). This is a nice setup with a good AT installed.

Oh and that was made as a Sniper III not converted given the low SN# and fittings. It looks like you most likely have an aftermarket bolt which looks like maybe the only non-original type of parts. Does it have a Nelson spring kit and dialer installed?

[Alexndl]

The owner mentionned the bolt was the first "ventury" style bold that was made for cocker (I meed to dig this story amd get a picture of the bolt)

Both side are dark green and light green marbled pattern but one side is a lot darker than the other...
Its better in person when the marker is exposed to sunlight but harder to take pictures

[FredMnkyDad10]

I have never seen the airline go directly into the front of the body like that.

I would agree, want to see more pictures showing the ano on both sides. Maybe in the sun, looks to be a really cool color.

[Alexndl]

Those banjo air line where typical on Sniper 3
Pre 2k front screw are 3/8"-16 thread (if I remember right) make it easyer to use standard fitting I would think

[Carp]

[snip...]Is the body anodized a marbled Green/Black? One side looks solid black while the other has some green (in the pictures)...[/snip]

There is just a slight hint of green, on the right rear side, just above the grip frame and on the back block area...😉

I have never seen the airline go directly into the front of the body like that. [snip]...[/snip]

VintageRex's Marker Exhibit a wonderful place...😋

[WORR13]

interesting, the right side of that sniper has pump arm milling and some extra milling. all 3's like that? it is pre2k right?

[Alexndl]

Yes its pre2k spec
The AT milling on the side seem to have been done after ano
The pump arm groove on the right side does not seem to be common on sniper 3

[Alexndl]

No estimate for the skull mask? 100$?

Blue Ize with junk foam and scratched lens? Are we talking 40$ or 80$?

30-40$ for the black one?