Low-profile Feed Elbow?

[JeepDVLZ45]

Not sure is something like this exists (or ever has), so I thought I’d ask.

Background:

I have a LH Feed Phantom and a Winnchester 50rnd hopper with Dye Lock lid. I’d love to start running this combo together.

1. Looking for an elbow that fits the Winnie, they all seem oversized, it’s almost like I need to make an adapter

2. All the elbows I own raise the hopper significantly higher then when I have one of my vert feed. Is there a sort of “low profile” elbow out there that keeps the hopper low and tight? Maybe something that fits over the phantom feed, bends 45* and then tapers down to the same diameter as the phantom neck so I can press the Winnie over the top of it (similar to how you’d run one with a direct feed)

Thanks in advance!

[BrickHaus]

Master sconi neck ought to work. Adjustable clamps both sides, shallow mount pockets, and its like 47* so the hopper lays over center of the marker slightly.

[BrickHaus]

Peep my profile pic. Im using one on that set up. Though my hopper,and feedneck it self needs to be shortened to maxamize the use of the low profile hopper.

[JeepDVLZ45]

Thanks for the info. I might give it a try.

[MrBarraclough]

It's not super low profile, but the lowest I've come across are the Armson/Pro-Team Products nylon 45 degree elbows. They're not nearly as tall as the JT/GI Sportz acrylic ones, and way less prone to cracking. I got mine from someone on eBay, though brand new.

[Cunha]

Armson / pro team is good
APP atomic is good

Armson is undersized so it might work well for your winny. The winny is smaller than basically anything, I suggest tape.

The sconi is good if you want the angled dangle.