I got an 8-year-old Ninja tank in a package deal recently. I sent the tank off to get tested before I used it, and that came back fine, which is nice, since I basically got the tank for free. When I took apart the regulator for an inspection, however, I noticed some weird stuff going on. First, there's this fine white powder inside of the regulator. At first I thought it was dry Loktite, but it's EVERYWHERE, not just on the threaded parts. It also doesn't wipe off easily. Or at least a Q-Tip won't clean it up. I need to really rub at it with a rag to get it off.
IMG_9103.JPG
IMG_9101.JPG
Also, and perhaps more concerning to me, there's some strange pitting on the shims and spring washers. The pitting is so slight that I can't even feel it, but I can't clean it off either. At least not with a rag. I've never seen wear like this on the inside of a regulator, especially one that's only 8 years old.
IMG_9100.JPG
Anyone have any idea what could have caused this? Is it safe to keep using these parts if I clean them up? Originally I was planning to rebuild the regulator if I had to, but now I'm leaning towards replacing it all together. Unless someone tells me otherwise.
IMG_9103.JPG
IMG_9101.JPG
Also, and perhaps more concerning to me, there's some strange pitting on the shims and spring washers. The pitting is so slight that I can't even feel it, but I can't clean it off either. At least not with a rag. I've never seen wear like this on the inside of a regulator, especially one that's only 8 years old.
IMG_9100.JPG
Anyone have any idea what could have caused this? Is it safe to keep using these parts if I clean them up? Originally I was planning to rebuild the regulator if I had to, but now I'm leaning towards replacing it all together. Unless someone tells me otherwise.
Comment