Adapter to use Pre 2k Banjo and Front block on 2K+ Cocker?

[shooter311]

I recently purchased a project cocker, it was a pre 2K but was drilled for a 2K+ Banjo bolt. Last night I looked through my parts and found a Pre2k front block with nice pneumatics on it. It would be great to just bolt it on the new project cocker.

I swear I was recently on a paintball fabricators page and saw an adapter to use pre 2k Banjos on a 2k+ cocker. I remember thinking "That is the dumbest thing I have ever seen". Of course a few days later I bought this cocker and I am thinking "That is the greatest thing I have seen." Now I can't find it. Did I dream this up?

If you know of such a thing and especially where to find one, please let me know! If not, it must not be too hard to drill out a front block to accept 2k+ banjo bolts, right? If the adapter doesn't exist I'll contact BMC and see if he can do something.

[OpusX]

The ones I saw where mentioned in the armory, and are the opposite of what you want. They allow you to put a 2k front block on a pre2k drilled body.

[shooter311]

The ones I saw where mentioned in the armory, and are the opposite of what you want. They allow you to put a 2k front block on a pre2k drilled body.

Yeah, I saw that in my searches I must have misread it or I am dreaming of the opposite adapter... Either way not a major problem, I have a 2k+ front block coming in, this adapter would just save me some work and free up a nice front block.

[Araphel]

Some of the old bob long (iirc) cockers had drilled out valve chambers with a reducer to allow them to use a a standard pre2k banjo screw, basically a 9/16-24 external thread plug with a 3/8-24 threaded hole that was loctited flush into the front of the body. I made one years ago for an evolution that had been bored to post 2k spec.