Don’t get the chance to play much stock class, and need to clear out some guns. Looking for some help for what i should list these for. If you are interested in something feel free to PM me, i won’t be offended.
look to price on the “move fast” end of the reasonable range. Pics below.
for the black phantoms, i have a number of different length barrels, bored and not bored, that they could be sold with.
phantom #1 - BBA, magpul grip, short pump handle, right offset body. Basically new
phantom #2 - VSC, 10 round feed, 45, old CCI or Wevo UC kit. Right offset body with ASP mod. Also comes with a Sanchez phantom barrel with a few different sizers (down to .681)
phantom #3 - VSC urban camo. Dye stickies, bobbed and gauged valve. Brass pump shim, 3D printed detent. This Gun is a players gun, and has a lot of scratches and anno wear. A little rougher than most cosmetically, but the anno hides the scratches well.
First Strike Phantom - Lapco rifled barrel turned to phantom threads from a blank. Custom bolt action (done well with a mill), mounted sight rail, stock. The front rail is something i made, a little rough around the edges but it works well. It’s a UC rod epoxied into a picatinny rail blank i drilled a hole into. Cerakoted
PGP - extended pump, RVA, speed feed
Pug - .690 bore with wedgits, 45 frame. Nickel is in good shape. Feed plug is drilled for a leash
look to price on the “move fast” end of the reasonable range. Pics below.
for the black phantoms, i have a number of different length barrels, bored and not bored, that they could be sold with.
phantom #1 - BBA, magpul grip, short pump handle, right offset body. Basically new
phantom #2 - VSC, 10 round feed, 45, old CCI or Wevo UC kit. Right offset body with ASP mod. Also comes with a Sanchez phantom barrel with a few different sizers (down to .681)
phantom #3 - VSC urban camo. Dye stickies, bobbed and gauged valve. Brass pump shim, 3D printed detent. This Gun is a players gun, and has a lot of scratches and anno wear. A little rougher than most cosmetically, but the anno hides the scratches well.
First Strike Phantom - Lapco rifled barrel turned to phantom threads from a blank. Custom bolt action (done well with a mill), mounted sight rail, stock. The front rail is something i made, a little rough around the edges but it works well. It’s a UC rod epoxied into a picatinny rail blank i drilled a hole into. Cerakoted
PGP - extended pump, RVA, speed feed
Pug - .690 bore with wedgits, 45 frame. Nickel is in good shape. Feed plug is drilled for a leash
Comment