ASA Setup Recommendations

[Toestr]

I'm looking for some ASA recommendations that have a bottom or possibly front output to mount this MaxFlo, as I'd rather not run it out the side if possible. On/offs would be nice but I might just get a screw in on/off adapter if that's difficult to find.

Sent from my Pixel 4a using Tapatalk

[devilzcall]

Would you mount it below your gas-through frontgrip with a simple male-to-male fitting and run the macroline along the side?

[Toestr]

Would you mount it below your gas-through frontgrip with a simple male-to-male fitting and run the macroline along the side?

That could work I'm not sure that I'd like it but it could work.

Sent from my Pixel 4a using Tapatalk

[k_obeastly]

My best recommendation would be to acquire the rest of the parts to run it as a bottom line max flo.

otherwise find bl asa with the output on the bottom and an appropriately rated 1/8 m to m npt adaptor

ot not regulating a stbb.

[Toestr]

My best recommendation would be to acquire the rest of the parts to run it as a bottom line max flo.

otherwise find bl asa with the output on the bottom and an appropriately rated 1/8 m to m npt adaptor

ot not regulating a stbb.

I've made posts on multiple platforms looking for a 3k manifold MaxFlo but no responses. I picked this one up locally for $20 on a 4500 manifold version.

I've never seen a Bob Long ASA with bottom output. The only ones I've seen are the Guerilla Machete or the AC Parts ASA. I'm going to use a steel hydraulic nipple to mount off the bottom on the ASA. I just hope that will be strong enough to hold up if I take a tumble (I'm not a very aggressive player anyway.

You can't just expect me to NOT LP mod a STBB with such a large valve chamber

Sent from my Pixel 4a using Tapatalk

[k_obeastly]

If you can find one, the old check it unimounts could be turned to run the output out of the bottom. You will have to drill out the cage a bit but it can be done.

[k_obeastly]

Item number 354130539227 on ebay if you’re still looking