First things first, I'm a newb when it comes to cookers, that being said I got a nice mini ripper and a Ninja tank with a flex reg. What should I set the output pressure to and should I be adjusting the velocity from the IVC?
-
-
Cocker HPR are usually set to 300-350. You can sweetspot the HPR for best results, and then make minor adjustments to the IVC.
As for the tank reg, I’d guess you’d want something above the HPR, but you may need to play play around to see what works best. Maybe go for 500 and see if everything is running well, then try a little lower? -
600-800PSI is preferred. Sure you can run it lower but there isn't really a point.Comment
-
550psi works fine for me. I've got a couple of other markers that run better with low output tanks, and it ran fine on my Inception Designs cocker.
If you need a low output tank for other markers its fine, otherwise I'd just run it at 800psi.Comment
-
If you are running a 2nd HPA Reg there is no benefit of running your bottle at a lower pressure.
"When you are asked if you can do a job, tell 'em, 'Certainly I can!' Then get busy and find out how to do it." - Theodore Roosevelt
Feedback Link - https://www.mcarterbrown.com/forum/b...del-s-feedbackComment
Comment