Info on BPP autococker, rarity and value

[Alexndl]

Just bough this on local Craiglist

first time I see a BPP cocker, anyone have info on this milling pattern

look complete to me with front block, back block and the bolt seem to match the cocking rod design
I also have the matching ano freak front (SP teardrop 12" I think)

Also,any idea of value to see if I did good?

Now the good part

[Meleager7]

Holy crap, you find some good stuff!

[Alexndl]

Thanks
it came in a lot with this gen E Matrix and a complete Qloader setup

[Meleager7]

Jeebuz! You scored this too!?? Old tank aside , is it in working order?

[Alexndl]

Put a new battery, LCD look fine, solenoid click
Need to check sidewinder reg pressure first on my bench test and lube everything before putting air and test it
will most probably need a full oring rebuild
Any idea the ideal air pressure for DM3?

[lew]

Operating pressure for a Matrix is right around 180 psi.

Really cool Matrix, too.

[Ecapnation]

Bpp.... Boss paintball products?

Also is that a warp breach on the matrix?

[Alexndl]

The breech is swivel and can accomodade side feed and warp (probably top feed too but dont think could hold a hopper)
Body have been milled (cut wing on the side of body) for side feed
I also have the original top feed

[Ecapnation]

Swivel breaches were made by ardvark quite rate...

If it was a warp only breach chances are I assembled that gun

[bacci paintball]

I think the badge and being in Canada make it Blizzard Paintball, or Blizzard Paintball Products? I sent the photo and this link to ThisIsPaintbalCa who I believe knows more about these cockers.

[Magmoormaster]

That would make sense, considering some other Blizzard cockers I've seen. The milling looks very similar.

Based on parts alone, I'd say it's worth at least $350-400.

[Alexndl]

The jewel on the frame look to have been change but look like an eclipse frame?
The front block have a bomb 3 way, Kapp LPR amd its suppose to be a rat valve

[Magmoormaster]

Yeah definitely an Eclipse frame, worth $200+ on its own. The beavertail is a DYE, worth $50 on its own.

[Alexndl]

I have learned it would be from a small shop around Montreal (Canada) they or he did not made a lot of cocker but had some different milling pattern