Cocker Pressure with these Internals

[THE_Incredible_Hulk]

Hello, I've got yet another project. LOL. I was wondering what stock WGP lower tube will get in terms of pressure? CCM? ID? AKA? The marker is a full length 04 Pro Stock that'll more than likely end up with a Lightning bolt.

Thanks,
Jim

[Magmoormaster]

Stock WGP internals can range depending on the springs. Stock springs will usually sweetspot at about 350 PSI. They can get down into the 250 range with a lighter valve spring though. Assuming you're using a complete CCM lower tube, you're looking at about 300 PSI. I haven't heard much for ID, I'd assume somewhere in the 250 range. AKA is often in the 180 to 200 PSI range but are often very difficult to tune.

[THE_Incredible_Hulk]

Magmoormaster, thank you. That is the information I am looking for.

[THE_Incredible_Hulk]

Several people have asked what this project is. So I might as well let the cat out of the bag here and go off topic on my thread. LOL. It's an 04 Pro Stock that'll have a TJD PA Lite. I got CCM lower tube on the way. She'll have a feedneck mod so clamping feednecks can be used.