Welcome to MCB! We are the most popular and active paintball forum found on the internet! Thank you for stopping by.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The new site changes also meant cookie changes. Sorry. Unavoidable. If you're getting logged out, you need to clear your browser cache / data and cookies. Then when you log back in, you will be all set. More HERE on what's happening next.
I have never used one but that price is terrible. $45 dollars with unknown hours, no warranty and unknown maintenance. You can buy a brand new one off Amazon for 63, a Vevor from Walmart for 53, or a new vevor from the manufacturer for 50.
Not too bad for a 15ci/3000psi tank. About 225 full pumps. The cylinder gets hot from
the compression though so you will need to take a couple breaks to let it cool or you'll
melt your O-rings.
A 9ci id quick and easy though. However I did try filling my 80/4500....almost made it too....took 3 weeks 🤣😂
I got one of those along with a PCP rifle I had a few years ago. I gave it a try just for giggles, using an older (and technically out of hydro) 68/3K tank.
Probably had less than 200 psi when I started, and I conservatively estimate it took about 265,000 strokes to get it up to 3K on the gauge.
I figured it'd be great if you could get it set up as part of a daily exercise routine- 100 strokes a day during your workout, and by the weekend you'll have a full tank. But as a regular way to fill tanks? No thank you. Heck, one of the first things I did with the rifle was buy an adapter to hook it to one of my SCUBA tanks.
\
Doc.
Approximately 300 pumps to fill a 13/3k, 1000 pumps to fill a 48/3k. I only fill to about 2000psi because I don't really trust the Chinese manufacturing.
Comment