empire sniper mamba trigger and inception sear

[ramagupa]

hello

purchased a mamba trigger and can’t get to work properly with the stock sear without slop

curious if picking up the roller sear will get it to function properly and perfect like the stock set up

worried about investing another 35 dollars for them both to not function

thanks

[superman]

the stock sear is similar to the inception sear. What exactly is the issue? slop in the trigger? slop in the sear?
is your sear spring strong enough?

[ramagupa]

okay so yea slop in the trigger pull, where the stock trigger seems to engage a little better.

also it seems that setting the mambas set screw further in is causing the sear to not disengage the hammer. i was curious if the sears trigger point in the inception sear would match the mamba trigger better.

waiting on my inception pump kit that comes in a few hours to mess with timing/trigger slop etc

let me know if any of this is unclear

edit: going to mess around with accepting slop in the trigger pull to allow the hammer/sear/autotrigger to work better.

[ramagupa]

i got it all assembled with the inception drift… tried swapping triggers a few times and it’s just not worth it for me it seems.. gonna stick with the stock for now

[superman]

You may have to time the auto trigger for the new trigger.

[ramagupa]

the perfect timing for it means the lug has to come up far enough that it interferes with the bolt pin

i want to love the mamba as it gives the whole marker a makeover..

even tho the inception roller and the stock sear are similar are they tweaked at all? to account for slop and sear height ?