Digikey PN for Impulse 'reflective eye'?

[Siress]

As the title says. Wondering if anyone knows of a good replacement for the OEM eye ribbon.

[latches109]

http://www.zdspb.com/store/elect_opto.html

[Siress]

http://www.zdspb.com/store/elect_opto.html

I don't see it listed. The only reflective eye component listed is for a Morlock board - i.e. custom builds.

[latches109]

It should work, but I’m not sure if it’ll fit. I could put a multimeter to mine and tell you the voltage needed, then use calipers to get the right size.

[Siress]

What? The size is on the datasheet. It's relatively huge. Nearly 5mm thick, 6mm tall, 4.4mm wide... OEM is maybe 3mm OD by 3mm long (by memory and eyecrometer) No way I'm cutting the body up - I'd do without the eye.

It would really suck if this form factor of reflective eye is no longer produced.

[Siress]

https://www.digikey.com/en/products/...S6140D/2798928 looks promising.

Ordered the 610 and 520nm wavelength versions. Will report back if I find time to install and try it out.

[Pballinporky]

Hey siress, did you ever try these out? I have five old vision imps and would really like to know if these worked or not. Thank you!

[Siress]

Sorry to say, they're still on the workbench.