So I’m still in process of rebuilding the sniper 1 you guys helped me I’d this past week. I’ve got a valve tool and some other stuff on the way. Can anyone give me a list of the o-ring sizes for the marker and possibly where to get them? Also where I can locate a cup seal if it needs one. Thanks guys.
-
-
First off.
If it's not leaking down the barrel the cup seal is fine.
Only orings you'll likely need are bolt orings.... Not sure if sniper 1's had the valve oring of later ones -
that’s good to know about the cup seal. It isn’t leaking. There was a oring on the vasa I changed with a spare that looked the same size. It crumbled once I removed it. The bolt o rings are functioning but need replaced, fronts stretched. I believe there’s an o ring in the valve I haven’t check yet. Ordered a valve tool that’s on the way. Hoping to get o rings ready for when it comes if there is one. Do you know what size the bolt o rings are?Originally posted by Ecapnation View PostComment
-
Not off hand no.... Sniper ones were garage made and had a few different generations of bolts on them.Comment
-
I’ve got a sniper 2 quick detach bolt in mine right now If that helps at all.Originally posted by Ecapnation View PostComment
Comment