Blowback frame compatibility

[Psycho91]

How can I tell which frames will work on which blowback, I know some bodies were flat on the bottom and some were round, but what about the newer kingman frames and the vs/rs series frames, also are their any decent single trigger frames that won't Crack and break apart, I think piranha made some decent ones but don't know if they will fit anything else

[Psycho91]

Also I see bacci has a couple taso frames lying around with no guts, will regular kingman sears and single triggers fit in them

[scottieb]

Bacci has them listed as Taso frames but they are not Taso frames. They are Diamond Labs frames. DL frames take trigger internals akin to Benchmark frames.

[Psycho91]

Are those frame guts hard to find or Uber expensive

[OpusX]

Also I see bacci has a couple taso frames lying around with no guts, will regular kingman sears and single triggers fit in them

Kingman sears are a yes on all Taso frames. Now the triggers could be the rare, early model thin trigger, or the more common standard fat trigger. Myrkul may have pics on the thin trigger Taso frame.

[Psycho91]

Must be why the have been sitting then

[Myrkul]

I have two of the TASO humpback frames from Bacci, the take standard Kingman springs, pins, and Sears.

The only odd part is they take the older style thin trigger plate. They are a little tricky to find, but not terrible, and usually are pretty inexpensive when found. I used the trigger plates from the PT Xtreme Grip frames Bacci also had listed and they work perfectly.

[Toestr]

IIRC Piranha frames have the same spacing as Spyder frames but the have a lug that fits into a groove on the body towards the front. If you cut that off it should work.

[Psycho91]

Oh and I forgot what about azodin frames

[Toestr]

Those are flat topped.

[superman]

What about these?

[Psycho91]

I did have the idea of seeing if a trigger shoe would fit it

[superman]

How many triggers would need to be made is more of the question. If it is only 1 or 2. It would likely be awhile. If it was more like 20+ then it starts to become a bit more realistic. Still not sure what one would cost. I would also likely need one in hand to reference.

[Psycho91]

I'm sure I could make one myself with some scrap and hand tools, i would just make a blde style trigger for it, it would be awhile before I could spend that much on a frame again anyway lol

[Psycho91]

Are newer style kingman frames flat top or round top like piranha frames

[Morgenstern]

^Round topped. The new and old Spyders have frames that are still a direct swap with each other, thankfully.