Azodin KP3 ASA leak

[Vince]

It leaks when I screw in a tank, even with the front turn knob pulled off....

I can't seem to find any videos on proper disassembly/reassembly of this component. Any clues?

[Spider!]

I think these are the ones with a little slotted collar holding in an o-ring(?) From the bottle side.

I think you poke the stem out from the back and put a large slotted screw driver on that collar. Out of the six or seven floating around our crew, I've only had to mess with one or two. They are worth fixing.

[Vince]

Thanks for the tip! It was actually on the turn nob side.

For anyone visiting this thread, the issue was solved by replacing this o-ring.

Inner O-Ring (RV08/R033)

Mine had apparently blown out somehow.