please help! In need of a micro high pressure solenoid valve

[Veldra]

I am in search of a tiny high-pressure solenoid valve capable of withstanding the pressure of a 12-gram Co2 cartridge or more. I'd love to run it off a 9V battery or two but as space is limited the fewer batteries I need to power this the better. Even if you can help point me in the right direction that would be greatly appreciated!

[Jordan]

800psi, micro? I'd be surprised if they exist.

You'll need to regulate it somehow or come up with a different design.

[flyweightnate]

CO2 isn't solenoid valve friendly. The liquid phase transition wreaks havoc on seals.

I'd consider something like an MQ or uprising frame. Use a solenoid plunger to drive your valve, instead of using an off- the- shelf valve. Then you can design for the pressure, and build in a relief and account for thermal shocks.

[jetenginekyle]

https://polarstarairsoft.com

looks like the same solenoid used in the bob long insight/onslought. this is the picture from field ones site

[flyweightnate]

MAC bullet valve... don't recall the specs on these offhand

[latches109]

120psi max, definitely not c02 friendly. The 309s all have custom mod numbers. The bob long one is stepped and difficult to seal on custom housings

[dano_____]

You might need to use a pilot driven solenoid where you are regulating the air down to push a pilot valve to trigger a 5-way valve.