Replacement Goggle Foam - Dye I4s

[Cdn_Cuda]

Picked up a pair of Dye I4 in the snakeskin camp pattern and am attempting to fix them up a little before selling. The foam is in decent shape, but needed to be re-glued and now I am thinking about putting new foam in. Trouble is you can't get any replacement foam kits. Is there a type of foam people are using to replace mask foam? Any suggestions?

Update: found a Canadian store that has the foam in stock and cheap shipping.

[Trbo323]

I know you can get replacement foam for the empire e-vents and since a human face fits in both masks I can't imagine it would be horribly different. Maybe look into that and see what it looks like

Sent from my Moto Z (2) using Tapatalk

[Chuck E Ducky]

Dye use to sell replacement foam for the i4 have you checked with them? You can just glue it back on. I always just use a name brand jell type superglue. But make sure you remove the lens so you accidentally don’t drip it on your lens. That’s why I prefer the jell type it says where you put it.

[Cdn_Cuda]

I've re-glued the original foam and it's okay, just a little worn down. I've looked for Dye I4 and I5 foam and they are all sold out. Same with Empire EVS foam. I think the only foam I can find are for Sly Annex masks.

[Cunha]

They do sell i4 kits. It comes with glue and is 20 dollars

[Cunha]

https://www.ebay.com/itm/303723892839

[XEMON]

I've bought the above kit for my I4.
2 things to note:
- the glue hold 1 day, I re-glued it with neoprene glue and it hasn't moved since.
- the foam is much softer than the original. It's not necessarily a bad thing, but don't expect that nice dense foam. If you tighten your mask really hard, you can feel the plastic.

But over all, for the price it saved me from buying a new mask so it was well worth it.

[Cdn_Cuda]

Good to know about the kit. The current foam is okay, but very soft as you describe. My face is too big for an I4, so I’ll either sell it or keep as a lender. I’ve heard I5 foam works as well (same lenses, so foam should be similar) but need to be cut off the frame. It looks very nice and only costs a few bucks more.

[Chuck E Ducky]

I would still use the gel type superglue.

[custar]

I have used some closed cell insulation foam and Gorilla glue.

custar