Eblade eye drilling who does it

[Brandon]

I’ve got a project cocker I picked up and all the parts to put the eblade one but the body isn’t drilled and I want to have it drilled. Who does it or who do you all recommend ?

thanks

[Trbo323]

People do it but it's not all that complicated, 2 holes and you thread one of them.

Do it yourself, get some experience. As long as you can hold a drill somewhat steady you can do it

Sent from my Moto Z (2) using Tapatalk

[Alexndl]

People usually prefer undrilled body

Which cocker body do you have?
I hope its not a rare one...

[the_matrix_guy]

Indeed. You can always swap the body with one that's drilled already. Everytime a Cocker is drilled, a kitten dies somewhere. You don't want the kitties to die, do you?

[Brandon]

It’s an 2k4 prostock It’s a common body.

[Trbo323]

It’s an 2k4 prostock It’s a common body.

Drill it

Sent from my Moto Z (2) using Tapatalk

[the_matrix_guy]

Yeah, in that case... no harm done.

[Alexndl]

ROTFL, ok it seem you have the approval to drill this one

But you understand we needed to check first which one, we all don t want kitties to die

From what I remember it was on the ebalde kit manual, will try to find it or I can measure one I have here that was brutalised at some point in time

[Brandon]

I’m sure I can find the manual online, not super confident in my abilities to drill it and not mess it up. Hence why I was looking for someone that’s done it before or does it as a service

[Paintslinger16]

Unfortunately it’s pretty easy if you have the template, hence all the drilled bodies.
tape the template on the body, use a punch for the two holes, it’s best to do the actual drilling in a drill press

[Alexndl]

Have you asked Superman or Doc?
they are both in the airsmith section

I am sure there are other person that can do it but I would start with them

[DocsMachine]

Pretty sure I can drill those things in my sleep. Probably have, once or twice.

It's been a while, thankfully, but back in the day? I lost count how many I drilled.

(Not to brag or anything, but it's worth noting I, personally, drilled the third-ever set of eye holes for an Angel, back in roughly 1999. I have a little experience. )

Doc.