Modern adjustable regs that go to 650psi?

[Jordan]

What's out there?

Edit: adjustable HPRs. I'm out of the loop on most things modern and just want a decent HPR for a couple of my markers that require externally adjustable regs.

[superman]

powerhouse!
ninja can too, but i am not a fan.

[Toestr]

I have a standard Ninja set to 650. There's also the Ninja Flex reg that is adjustable on the fly.

[Jordan]

Guess I should have specified - I'm looking for HPRs, not bottle regs.

I'll edit the original post.

[warbosschoppa]

Sidewinders can go up to 800 and Inception HPRs can go as high as your tank's output.

[Jordan]

Sidewinders can go up to 800 and Inception HPRs can go as high as your tank's output.

AKA was a terrible experience when attempting to purchase anything as a Canadian buyer so as much as I like the Sidewinder I had 20 years ago, I'll stay away from them.

Are the Inception HPRs the WGP Ergo clones? (Internally, at least.)

[superman]

very similar, but not exactly the same.

[Pumpytrilly1]

The old ans regs do 600 or 650

[Jordan]

Does the rebuild kit come with a new reg piston/relief valve, or just seals and a seat?

[Toestr]

I don't believe so. I've tried disassembling an Automag piston before and just like AGD says the vent no longer functions properly after rebuild. If you're going to use this on a poppet you could just plug the vent with a set screw. A sweet spotted poppet will shoot slower if the reg creeps.

[Jordan]

Toestr I would want it for my Sheridan which doesn't sweetspot, so an overpressure vent is necessary.

[latches109]

Palmers goes to 700psi. The stainless air americas go to 1000psi