Tippmann E Trigger capacitor

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • FlightMedic938
    MCB Member
    • Feb 2023
    • 417

    #1

    Tippmann E Trigger capacitor

    I had a dumbass moment yesterday and punctured my capacitor attempting to use the stock bottom line screw. The long one. Everything still works fine but I’m sure the capacitor is on its last breath because it literally has a hole in it. Could somebody help me out and guide me to a replacement?
  • Melrosejedi
    pump kings
    • Feb 2021
    • 668
    • Upstate new vampire york

    #2
    Try using digi-key. I picked up a capacitor for my e frame from them once.

    Comment

    • Trbo323
      MCB Member
      • Jul 2020
      • 6358
      • Vancouver WA

      #3
      Typically capacitors have the specs on the side. There should be a voltage and a uH number.

      Find those and make sure the physical dimensions are something that will fit and you are set

      Then just make sure you are not putting it in backwards (positive into negative)

      Sent from my motorola edge 5G UW (2021) using Tapatalk

      I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.

      Feedback
      https://www.mcarterbrown.com/forum/b...323-s-feedback

      Comment

      • FlightMedic938
        MCB Member
        • Feb 2023
        • 417

        #4
        Thanks guys. It’s a 6800uf 10v and digi key does have one that appears to be a good replacement

        Comment

        • SuperActionMan
          kn00b
          • Dec 2023
          • 21
          • Lancaster, CA

          #5
          It's also fine to use one that has a higher voltage rating like 16v, but they are usually physically larger. 10v 6800μF is common, though, so you shouldn't have to compromise on specs.
          Late '80s PGP, late '90s Spyder, two A-5s, a 98 Custom, and a TiPX.

          Comment

          Working...